You can install an Articulating Arm on the female 1/4" thread, and install a monitor or a LED on the articulating arm. Includes: 1x 15mm-Single-RodClamp-2 Material: Aluminum Alloy Net Weight: 40g
SmallRig 15mm Rail Bridge 1522 features 2pcs of 15mm rod clamps with standard 60mm spacing and a ratchet wingnut that allows easy adjustment. It is equipped with Four 1/4" mounting holes, and two 1/4" screws to support accessories. Package Includes:1 x Rail Bridge 15222 x 1/4''Screw1 x Hex Spanner Material(s): Aluminum Alloy
This camera base plate is specially designed for DSLR camera. Equipped with an Arca Swiss quick release clamp on top, which is suitable for a DSLR camera with Arca Swiss quick release plate attached. An integrated 15mm rod clamp locks a pair of 15mm rods and works for follow focus/matte box attaching. The easy plate on bottom allows switching photography
Key Features:1. Slide forwards and backwards to find the balance point of your rigs2. Built-in Shoe mounts on the top and at the back 3. 1/4’’-20 & 3/8’’-16 mounting points for additional accessories4. Arri locating holes for attaching Arri compatible extension blocks5. With a 1/4’’ spanner for quick use
Attached to the cage with two 1/4”-20 screws, it prevents HDMI cable from accidental dropping. Moreover, this HDMI lock is equipped with two M5 threaded holes to lock USB Cable with screws. Material(s): Aluminum AlloyNet Weight: 41g Package Includes:1x HDMI Lock2x M5 Screw2x 1/4'' Screw1x Hex Spanner
SmallRig Manfrotto Dovetail Clamp 1716 is a Manfrotto standard dovetail clamp. It works with SmallRig Quick Dovetail (Manfrotto) 1280, SmallRig Quick Dovetail (Manfrotto) 1647, SmallRig Manfrotto Standard Quick Dovetail (9") 1460 and other 501PL plates.Material(s): Aluminum AlloyPackage Includes:1x Manfrotto Dovetail ClampNet Weight: 111g
Le SM4-R est un support de suspension pour le montage de différents microphones RØDE sur un pied de micro ou une perche avec un filetage de 3/8 "ou 5/8".Le SM4-R est équipé de deux supports Rycote Lyre pour assurer une isolation maximale contre les vibrations de manipulation, quatre points de montage possibles pour s'adapter à la gamme complète de
Ce support pour partitions peut être monté sur n'importe quel pied de micro d’un diamètre maximum de 23 mm. Son mécanisme de serrage en acier offre une bonne adhérence tandis que le bouton à vis permet une meilleure stabilité. La profondeur et l'angle du support peuvent être ajustés afin d'obtenir la position idéale pour lire vos documents. Ce support est
Le Movo WS10n est une bonnette de microphone en fourrure de lapin artificiel qui réduit considérablement le bruit en fournissant une meilleure diffusion du vent. Le pare-vent velu est doté d'une bande de fixation élastique universelle pour s'adapter à presque tous les lavaliers. Vous pouvez également l'utiliser sur un pare-vent en mousse offrant une
Le Movo WS10n est une bonnette de microphone en fourrure de lapin artificiel qui réduit considérablement le bruit en fournissant une meilleure diffusion du vent. Le pare-vent velu est doté d'une bande de fixation élastique universelle pour s'adapter à presque tous les lavaliers. Vous pouvez également l'utiliser sur un pare-vent en mousse offrant une
Le Movo MCW5 est une bonnette en mousse comprenant un clips de revers qui s'adapte à une variété de microphones cravate. Contenu: 1x MCW5 avec clip de revers
Le Movo MCW5 est une bonnette en mousse comprenant un clips de revers qui s'adapte à une variété de microphones cravate. Contenu: 5x MCW5 avec clip de revers
Ideal to control your teleprompter while you use it, especially if you don’t have an assistant while recording. It’s so small that you can hide it in the palm of your hand or in a pocket. This fantastic gadget has been tested with leading teleprompter APP on iOS and Android to ensure maximum compatibility. Works with 2 AAA batteries not included.
The TP-iLight PRO is a teleprompter designed for use with tablets up to 10 '' such as the iPad (or any tablet or mobile phone with maximum dimensions of 25cm x 20cm). With the compact and affordable Teleprompter TP-iLight PRO you can record videos and presentations without having to worry about remembering the text, just like the pros do TV.
Bonnette universelle en mousse pour micro à main. Elle protège le micro des bruits indésirables dus au souffle ou au vent. Env. 7,5cmx7,5cm Couleur: Noir
Couleur noireLongueur de 60 cm à 150 cmRésolution maximale de la vidéo en cours de téléchargement: 4096 x 2160pxSignal: audio - vidéoBlindage: ouiPoids: 59 g
Câble 3m adaptateur audio Jack 3,5 mm stéréo mâle vers 2x RCA mâles
Câble 10m rallonge audio stéréo 2x RCA mâles - 2x RCA femelles
Includes two 1/4"-20 threaded holes.Length x Width: 100 mm x 29 mmTotal thickness is 9,5 mm. Designed to work with the Shoulderpod K1 knobs (not included)Allows mounting the H1 Handles for handheld useCan be mounted on a tripod though one of the four threaded holes
Adaptateur Jack stereo 6,35 mm Mâle - 2x RCA Femelle
Adaptateur Jack mono 6,35 mm Mâle - RCA Femelle
Câble vidéo composite RCA Mâle - RCA Mâle 10m
Four Section3.93 to 15.09' (1200 to 4600mm)Supports 1.10 lbs (0.5kg)Rubber GripAccommodates Cable Through
The Shoulderpod W1 Wrist Strap is designed to provide added security while using the Shoulderpod H1 Handle as part of your smartphone video rig. The W1 strap has a hole that fits over the 1/4"-20 threaded stud of the H1 Handle, which is then sandwiched in between either your 1/4"-20 threaded device, such as a digital camera, or a Shoulderpod accessory, such
1 x ShoulderPod P2 short mounting plate2 x Knob K11 x Cold Shoe Z1
Suitable for Different Model Tablets0 to 90° Angle of InclinationTablet Attaches and Detaches QuicklySwitches Between Portrait & Landscape
Case Relay Camera Power System (CPS) lets you power your camera continually with an external battery pack or wall power, providing peace of mind knowing you have an uninterrupted power source for your camera. Requires Relay Camera Coupler sold separately.
1920 x 1200 Touchscreen Display10-Bit Exterior Viewable Monitor4K HDMI Input1000 cd/m² BrightnessAtomHDR Mode with 10-Stop Dynamic Range10-Bit 4:2:2 ProRes & DNxHR EncodingRecords to Mini SSDsSupports a Variety of Log FormatsSingle Sony L-Series Battery Slot
Incident Metering for Ambient & Flash40° Reflected Light MeteringPhoto, Cine, and HD Cine Metering ModesCustomizable LCD with Auto BacklightRange: 0 to 19.9 EV at ISO 100Flash Range: f/1.0 to f/90.9 at ISO 100Exposure Time: 1/8000 to 60 SecRepeat Accuracy: ±0.1 EV or LessPC Sync Terminal & Cordless Flash OptionRuns on One AA Battery
Relay Camera Couplers work in tandem with the Case Relay Camera Power System to keep your camera powered continually with an external 5V USB battery pack or wall power. The Relay Coupler is simply an insert for your camera battery cavity that enables powering the camera via Case Relay Camera Power System. The coupler does not contain a battery or hold a
Relay Camera Couplers work in tandem with the Case Relay Camera Power System to keep your camera powered continually with an external 5V USB battery pack or wall power. The Relay Coupler is simply an insert for your camera battery cavity that enables powering the camera via Case Relay Camera Power System. The coupler does not contain a battery or hold a
Relay Camera Couplers work in tandem with the Case Relay Camera Power System to keep your camera powered continually with an external 5V USB battery pack or wall power. The Relay Coupler is simply an insert for your camera battery cavity that enables powering the camera via Case Relay Camera Power System. The coupler does not contain a battery or hold a
Relay Camera Couplers work in tandem with the Case Relay Camera Power System to keep your camera powered continually with an external 5V USB battery pack or wall power. The Relay Coupler is simply an insert for your camera battery cavity that enables powering the camera via Case Relay Camera Power System. The coupler does not contain a battery or hold a
Relay Camera Couplers work in tandem with the Case Relay Camera Power System to keep your camera powered continually with an external 5V USB battery pack or wall power. The Relay Coupler is simply an insert for your camera battery cavity that enables powering the camera via Case Relay Camera Power System. The coupler does not contain a battery or hold a
Relay Camera Couplers work in tandem with the Case Relay Camera Power System to keep your camera powered continually with an external 5V USB battery pack or wall power. The Relay Coupler is simply an insert for your camera battery cavity that enables powering the camera via Case Relay Camera Power System. The coupler does not contain a battery or hold a
X/Y Stereo MicNew Layout of Integral ControlsRecord WAVs & MP3s up to 24-Bit / 96 kHzRecords to microSD/SDHC3.5mm Input/Output JackBuilt-In Limiter and Low-Cut FilterHigh-Speed USB 2.0 ConnectivityWorks as a USB Audio InterfaceUses 2 Included AAA Batteries
2-Channel Field Audio RecorderAttach on Belts, Slip into a PocketLMF-1 Omnidirectional Lavalier Mic1/8" Stereo Mic/Line Input24-Bit/96 kHz Audio, WAV and MP3On-Board Limiter and Auto-Level ControlOne-Touch Controls, Easy-to-Read DisplayUp to 32GB on microSD or microSDHC Card2 x AAA Batteries Record up to 10 HoursWindscreen, Belt Clip, Mic Clip
2-Channel Field Audio RecorderSGH-6 Shotgun MicrophoneSMF-1 Shockmount Attaches to Camera1/8" Stereo Mic/Line Input24-Bit/96 kHz Audio, WAV and MP3On-Board Limiter and Auto-Level ControlOne-Touch Controls, Easy-to-Read DisplayUp to 32GB on microSD or microSDHC Card2 x AAA Batteries Record up to 6.5 HoursWindscreen, Audio Cable for Camera
CCS SteadyShot camera mountCamera mounting bolt(2) KIPP SteadyShot adjustment handles1/4" to 3/8" Tripod Adapter/Bushing
This aluminum tripod offer an ideal compromise between lightness, strength and price.Aluminum4 sectionsH.max = 145cmWeight = 1.46kgH min = 46cm
Câble XLR 3/3 Male - Femelle 3m
Câble XLR 3/3 Male - Femelle 1.5m
Variable Color TemperatureBuilt-In 30-Step Dimmer120° Beam AngleBrightness DisplayDMX Compatible4 x 1/4"-20 Mounting Holes
Material: CarbonWeight: 4.30 kgMaximum load: 12 kgEffective length: 60 cmCarbon slider with a very smooth and silent bearing on the bearings. The slider comes in a luxurious, very spacious carry bag that can also be used for tripods and a video head. The slider can be used on tripods, light holders or on any surface. With the help of adjustable legs and a
The 120cm HASN12CRF Straight HDMI Type-A to Right-Angle Mini-HDMI Type-C Cable from Cineroid connects DSLR/ENG cameras to monitors. The HDMI cable features a straight type-A connector at one end and a right-angle type-C connector at the other.
With Cineroid's HDMI Type-A HATN05ATN rotary cable, you can choose to connect your HDMI devices in straight or right-angle orientations. Each end of the HDMI Type-A cable can rotate 180 degrees between each position. Connect your DSLR or mirrorless camera to your laptop, or transmit audio and video from a laptop to an HD display. At 50 cm, you get a
PDMovie D-Tap Power Cable 0.3M (6pin) - DTAP-036
PDMovie D-Tap Cable 0.7M (6pin) DTAP-076
PDMovie D-Tap Cable 2m (6pin) DTAP-206
Enregistrement en 4K Entrées HDMI 2.0 Idéal pour les GH4, A7S et hybrides 4KAtomHDR = Plus détails pour assuré l'exposition de chaque plan sur le terrainVisualisez vos LUTs en temps réel sur le lieu de tournageRécupère en post-production des fichiers Pro Res, DNxHD et même Raw* (*sur certaines caméra, voir liste de compatibilité)Alimentation double batteries
5-inch Touchscreen with Daylight VisibilityProfessional grade camera-top monitor that can power your DSLR or mirrorless camera.Display: 5-inch, 1280x720, 294 PPIBrightness: 800 nitsInput: Micro HDMI, Micro USBOutput: ⅛” Headphone Jack, 7.2v PowerPower: Sony L Series Battery (Not Included)
5-inch Touchscreen with Daylight VisibilityProfessional grade camera-top monitor that can power your DSLR or mirrorless camera.Display: 5-inch, 1280x720, 294 PPIBrightness: 800 nitsInput: Micro HDMI, Micro USBOutput: ⅛” Headphone Jack, 7.2v Power
5-inch Touchscreen with Daylight VisibilityProfessional grade camera-top monitor that can power your DSLR or mirrorless camera.Display: 5-inch, 1280x720, 294 PPIBrightness: 800 nitsInput: Micro HDMI, Micro USBOutput: ⅛” Headphone Jack, 7.2v Power
5-inch Touchscreen with Daylight VisibilityProfessional grade camera-top monitor that can power your DSLR or mirrorless camera.Display: 5-inch, 1280x720, 294 PPIBrightness: 800 nitsInput: Micro HDMI, Micro USBOutput: ⅛” Headphone Jack, 7.2v Power
5-inch Touchscreen with Daylight VisibilityProfessional grade camera-top monitor that can power your DSLR or mirrorless camera.Display: 5-inch, 1280x720, 294 PPIBrightness: 800 nitsInput: Micro HDMI, Micro USBOutput: ⅛” Headphone Jack, 7.2v Power
5-inch Touchscreen with Daylight VisibilityProfessional grade camera-top monitor that can power your DSLR or mirrorless camera.Display: 5-inch, 1280x720, 294 PPIBrightness: 800 nitsInput: Micro HDMI, Micro USBOutput: ⅛” Headphone Jack, 7.2v Power
5-inch Touchscreen with Daylight VisibilityProfessional grade camera-top monitor that can power your DSLR or mirrorless camera.Display: 5-inch, 1280x720, 294 PPIBrightness: 800 nitsInput: Micro HDMI, Micro USBOutput: ⅛” Headphone Jack, 7.2v Power
5-inch Touchscreen with Daylight VisibilityProfessional grade camera-top monitor that can power your DSLR or mirrorless camera.Display: 5-inch, 1280x720, 294 PPIBrightness: 800 nitsInput: Micro HDMI, Micro USBOutput: ⅛” Headphone Jack, 7.2v Power
5-inch Touchscreen with Daylight VisibilityProfessional grade camera-top monitor that can power your DSLR or mirrorless camera.Display: 5-inch, 1280x720, 294 PPIBrightness: 800 nitsInput: Full-size SDI, Micro USBOutput: ⅛” Headphone Jack, 7.2v PowerPower: Sony L Series Battery (Not Included)
SmallRig 15mm Carbon Fiber Rod - 45cm 18 inch (2pcs) 871 It is the new version of carbon fiber rod with more smooth surface. It fits 15mm rod clamp but its surface is not shinny any more because we have redesign it based on some customers' advice.The carbon fiber rods are much lighter than stainless steel rods, but carbon fiber rods are incredibly rigid and
The Miops arm for Splash is a magic arm with support for the Miops Splash. With this set, you can position the Miops Splash, for example, over a bowl of water in which drops of water fall. The arm can be locked in any position using the rotary knob on the side.The arm is equipped with male and female threads, so it can be mounted on almost any tripod.The
Introducing the new Rotolight AEOS — a powerful, ultra-portable, all in one bi-colour LED light and HSS flash, that brings tremendous versatility to any shoot. Designed for portrait and location photographers and videographers on the move, AEOS is lightweight and portable thanks to its ‘ultra-thin’ design concept. Now includes integrated Elinchrom Skyport
Revolutionary all-in-one continuous LED light and HSS FlashNEO 2 is a revolutionary LED light, that combines the ‘shoot what you see’ benefits of continuous light, with the flexibility of High-Speed Sync (HSS) flash, for more power or to freeze action. With no recycle time, you’ll never miss a shot.
Revolutionary all-in-one continuous LED light and HSS FlashNEO 2 is a revolutionary LED light, that combines the ‘shoot what you see’ benefits of continuous light, with the flexibility of High-Speed Sync (HSS) flash, for more power or to freeze action. With no recycle time, you’ll never miss a shot.
Revolutionary all-in-one continuous LED light and HSS FlashNEO 2 is a revolutionary LED light, that combines the ‘shoot what you see’ benefits of continuous light, with the flexibility of High-Speed Sync (HSS) flash, for more power or to freeze action. With no recycle time, you’ll never miss a shot.
Mount your Rotolight to a High Density Comfort foam grip, or use with microphone or third party accessory pistol grip style mount. (Perfect as a grip handle for a rail support system.)
Rotolight 95 Wh V-mount Lithium Ion Battery with D-Tap charger
Revolutionary LED studio/location light and HSS FlashIncludes 6 piece Gel Filter Kit, Yoke, Power supply 110-240V inc. regional power cable, extension cable, DMX and V-lock plate as standard. Ships in protective Stratocell. **Barn Doors & V-lock Battery are not included**
Revolutionary LED studio/location light and HSS FlashIncludes 6 piece Gel Filter Kit, Yoke, Power supply 110-240V inc. regional power cable, extension cable, DMX and V-lock plate as standard. Ships in protective Stratocell. **Barn Doors & V-lock Battery are not included**
Rotolight AEOS 2 light Kit. Includes : 2 x Rotolight AEOS, 1 x Rotlight 2 light soft bag, 2 x portable light stand, 2 x PRO aluminium ball head, 2 x 4 Piece filter set (1x 216 diffusion , 250 diffusion, 1 x 184 Cosmetic Peach Skin Tone diffusion, 1 x 279 Minus Green), 2 x AC/DC Power Adapter and local mains cable