La RM5 permet de bien fixer le micro sur le pied sans nuire à sa directivité ni à sa bande passante. L’utilisation de fixations de micro RØDE optimise les performances de vos microphones. D’autres fixations de micro peuvent modifier la directivité et la bande passante de certains micros car ces fixations ne sont pas conçues avec la précision requise. Idéal
Grâce à son faible niveau de bruit et sa grande largeur de spectre compte tenu de sa taille, ce micro proposera à chaque enregistrement un son riche et profond. Il est ultra-léger et très robuste grâce à sa construction ABS thermoformé.
Transmission numérique série II, 2,4 GHzCryptage 128 bitsJusqu'à 100 mètres de portée *Affichage OLED (sur le récepteur)Un seul contactContrôle de gain à cinq niveauxBatterie AA, batterie NP-F ou alimentation USBVerrouillage de l'entrée XLR et de la sortie casque sur l'émetteur
Inclut Le TX-M2 (microphone à condensateur de haute qualité), le RX-DESK (récepteur de table) et une batterie au lithium-ion rechargeable LB-1Transmission numérique série II de 2.4 GHzCryptage du signal 128 bitsJusqu’à 8 unités utilisables simultanémentFaible bruit de manipulationPortée jusqu’à 100 m*Alimenté par la batterie rechargeable LB-1 incluse ou 2
Fabriqué à partir de fibre de carbone, le Rode Boompole Pro ne pèse que 535 g (18 oz) . Compact 810 mm (2 8 pouces), le perche s'étend jusqu'à 3 mètres (10 pieds). Conçu pour être utilisée avec des microphones professionnels tels que le RØDE NTG3 et le Blimp, Les sections sont facilement extensibles d'une seule main grâce à un mécanisme de verrouillage
The VXLR is used to convert a 3.5 mm mini-jack to a 3 pin XLR.
The VXLR+ is a 3.5mm female TRS socket to male XLR adaptor, which will convert 12-48V Phantom Power down to 3-5V 'Plug in Power', allowing RØDE on-camera microphones such as the VideoMicro and VideoMic GO, as well as self-worn microphones like the HS2 Headset Mic to receive power from the XLR input. The 3.5mm socket also features the same threaded connector
La protection DeadWombat est conçue pour minimiser le bruit du vent dans des lieux très venteux. La fourrure synthétique est conçue spécialement pour minimiser le bruit du vent tout en restant acoustiquement transparente. Produit compatible: Blimp
Small, lightweight stand, plastic base with folding legs, 3/8" thread.
Tapered slip-in microphone clip diameter 22-28 mm, high quality elastic rubber.
Tapered slip-in microphone clip, diameter 17-21 mm, high quality elastic rubber.
Pince micro flexiblePour micros de diamètre de 28 à 34 mmAdaptateur pas de vis 3/8" - 5/8"
Folding, short-legged design with die-cast base. Noiseless height-adjustment.
Inexpensive stand with professional features. Fiberglass-reinforced plastic base with foldable legs. Complete with boom arm.
Le SM4-R est un support de suspension pour le montage de différents microphones RØDE sur un pied de micro ou une perche avec un filetage de 3/8 "ou 5/8".Le SM4-R est équipé de deux supports Rycote Lyre pour assurer une isolation maximale contre les vibrations de manipulation, quatre points de montage possibles pour s'adapter à la gamme complète de
Pince micro flexiblePour micros de diamètre de 30 à 40 mmAdaptateur pas de vis 3/8" - 5/8"
Notre bras de bureau de microphone populaire et facile à utiliser avec un connecteur à filetage 3/8 "ou 5/8" pour les studios de sonorisation et les stations de travail multimédia avec une nouvelle pince de table innovante. Facile à positionner et adapté aux microphones à max. 0,8 kg. Le câble de microphone de 5 m de long avec un connecteur XLR à 3 broches
Le Movo WS10n est une bonnette de microphone en fourrure de lapin artificiel qui réduit considérablement le bruit en fournissant une meilleure diffusion du vent. Le pare-vent velu est doté d'une bande de fixation élastique universelle pour s'adapter à presque tous les lavaliers. Vous pouvez également l'utiliser sur un pare-vent en mousse offrant une
Le Movo WS10n est une bonnette de microphone en fourrure de lapin artificiel qui réduit considérablement le bruit en fournissant une meilleure diffusion du vent. Le pare-vent velu est doté d'une bande de fixation élastique universelle pour s'adapter à presque tous les lavaliers. Vous pouvez également l'utiliser sur un pare-vent en mousse offrant une
Le Movo MCW5 est une bonnette en mousse comprenant un clips de revers qui s'adapte à une variété de microphones cravate. Contenu: 1x MCW5 avec clip de revers
Le Movo MCW5 est une bonnette en mousse comprenant un clips de revers qui s'adapte à une variété de microphones cravate. Contenu: 5x MCW5 avec clip de revers
Bonnette universelle en mousse pour micro à main. Elle protège le micro des bruits indésirables dus au souffle ou au vent. Env. 7,5cmx7,5cm Couleur: Noir
Câble 3m adaptateur audio Jack 3,5 mm stéréo mâle vers 2x RCA mâles
Câble 10m rallonge audio stéréo 2x RCA mâles - 2x RCA femelles
Adaptateur Jack stereo 6,35 mm Mâle - 2x RCA Femelle
Adaptateur Jack mono 6,35 mm Mâle - RCA Femelle
Câble vidéo composite RCA Mâle - RCA Mâle 10m
Four Section3.93 to 15.09' (1200 to 4600mm)Supports 1.10 lbs (0.5kg)Rubber GripAccommodates Cable Through
Microphone table standHeight: 17.8 cmBasic type: roundWeight 1.4 kg
Pince micro flexiblePour micros de diamètre de 30 à 40 mmAdaptateur pas de vis 3/8" - 5/8"
Suitable for microphone arm 23850 and 23860.
X/Y Stereo MicNew Layout of Integral ControlsRecord WAVs & MP3s up to 24-Bit / 96 kHzRecords to microSD/SDHC3.5mm Input/Output JackBuilt-In Limiter and Low-Cut FilterHigh-Speed USB 2.0 ConnectivityWorks as a USB Audio InterfaceUses 2 Included AAA Batteries
2-Channel Field Audio RecorderAttach on Belts, Slip into a PocketLMF-1 Omnidirectional Lavalier Mic1/8" Stereo Mic/Line Input24-Bit/96 kHz Audio, WAV and MP3On-Board Limiter and Auto-Level ControlOne-Touch Controls, Easy-to-Read DisplayUp to 32GB on microSD or microSDHC Card2 x AAA Batteries Record up to 10 HoursWindscreen, Belt Clip, Mic Clip
2-Channel Field Audio RecorderSGH-6 Shotgun MicrophoneSMF-1 Shockmount Attaches to Camera1/8" Stereo Mic/Line Input24-Bit/96 kHz Audio, WAV and MP3On-Board Limiter and Auto-Level ControlOne-Touch Controls, Easy-to-Read DisplayUp to 32GB on microSD or microSDHC Card2 x AAA Batteries Record up to 6.5 HoursWindscreen, Audio Cable for Camera
The SC3 is a high quality shielded adapter designed to connect a smartLav to TRS (3.5mm) devices such as a camera or audio recorder. The gold-plated contacts have color codes and the gray indicates the TRRS input.
The SC2 is a quality shielded TRS cable with 3.5mm plugs. This spiral cable has a length from 170mm to 400mm and is equipped with L-shaped plugs.
The LMF-2 lavalier mic is designed for capturing every nuance. Combined with the F1, you can record high-resolution audio, perfect for interviews, wedding vows, and more. Screw-lockable mini-jack allows firm and secure connection. Note: Windscreen and Mic Clip are not included.
• Base diameter: 137 mm• Height: 152 mm• Leg construction: steel triobular base• Material: steel• Special features: marked triobular base; anti-vibration circular rubber insert ring• Threaded connector: 3/8"• Type: black• Weight: 0.75 kg
Thread adapter with an external diameter of 18 mm. Female thread 3/8". Male thread M8 x 12 mmFemale thread: 3/8" Male thread: M8 x 12 mm Special features: with knurled surface Type: zinc-plated Weight: 28g
Thread adapter with an external diameter of 18 mm. Female thread 3/8". Male thread 1/4"Female thread: 3/8" Male thread: 1/4" x 10 mm Special features: with knurled surface Type: zinc-plated Weight: 28g
Thread adapter with an external diameter of 18 mm. Female thread 3/8". Male thread 1/2"Female thread: 3/8" Male thread: 1/2" Special features: with knurled surface Type: zinc-plated Weight: 28g
Thread adapter with an external diameter of 18 mm. Female thread 1/2". Male thread 3/8"Female thread: 1/2" Male thread: 3/8" Special features: with knurled surface Type: zinc-plated Weight: 28g
Thread adapter with an external diameter of 18 mm. Female thread 5/8" 27 gauge. Male thread 3/8"Female thread: 5/8" 27 gauge Male thread: 3/8" Special features: with knurled surface Type: zinc-plated Weight: 28g
The RODE TX-M2 is a digital wireless microphone that transmits audio over distances of up 100m to compatible RODE receivers. With its 140 dB SPL and frequency response of 35 Hz to 20 kHz, the microphone provides out-of-the-box functionality for singers, presenters, and DJs, working well for live shows, conferences, special events, ceremonies, and more.
The RØDE WS6 is an excellent wind protection for barrel microphones. The WS6 is an open-cell foam with an acoustically neutral synthetic outer fur. A rubber base prevents wind noise from entering the back of the microphone. For RØDE NTG1 and NTG2 as well as for all micro guns with a maximum length of 160,5mm and a diameter of 21 - 22,5mm.
The microphone stand is lightweight and reliable for the developing musician. The boom arm is 680 mm long, making it ideal for singers of all sizes. The clamp reliably locks the tilt of your foot. The steel frame is robust and durable for better reliability. The tripod design with rubber footrests keeps the main mast upright and fixed on uneven surfaces.
Integrated Mixer Compatible with Optional Zoom Mics Resolution: 24-Bit/192 kHz Four Combo XLR-1/4" Inputs High-Quality Preamps with Phantom Power Built-In Limiters on Every Input/Output Easy-to-Read LCD Display Included AC & DC-HIROSE Adapters Includes Cubase LE and Wavelab LE VR & Ambisonic Compatible
The zinc-plated 215 Thread Adapter from K&M features a 1/2 and 3/8" female thread to a 5/8" male thread. It can be used to adapt a 3/8" and 1/2" stand to a 5/8" attachment.
3/8 female thread and 5/8 "male thread.
Automatic ignition function by cable connection Powered by LB-1 battery, 2 AA LR06 batteries or micro USB cable Supplied with a rechargeable LB-1 lithium-ion battery, a removable 3.5mm symmetrical cable and a micro USB cable Integrated hatch for the battery Optimized shape windshield Digital controls
VideoMic™ Me-L is a high-quality microphone for your iPhone® or iPad® (with Lightning connector) designed to give you incredible audio when shooting video. The microphone's directionality reduces surrounding noises to focus on exactly what you're filming, ensuring your videos sound clear and intelligible. The 3.5mm jack provides a headphone output for audio
Broadcast-quality dynamic capsule Optimised for speech applications Internal pop filter to minimise plosives Robust, all metal construction Designed for use with RØDECaster™ Pro Podcast Production Studio
Forget about digital clipping and focus on the shot with the Zoom F6, an ultra-compact, multi-track field recorder with 32-bit float technology for distortion-free dynamic range, and up to 14 tracks of simultaneous recording for professional and enthusiast applications on set and in the field. Slide it in a sound bag, sling it over your shoulder, or mount it
Rycote is a recognized brand to design professional and efficient windbreaks to achieve impeccable sound. The same goes for this Mini Windjammer model designed for the famous Røde micro VideoMic. This windshield is suitable for both the Original version of the VideoMic and the version equipped with a shockproof suspension (Lyre). It is made from high quality
Rycote is a recognized brand to design professional and efficient windbreaks to achieve impeccable sound. The same goes for this Mini Windjammer model designed for the famous Røde micro VideoMic Pro+. It is made from high quality materials, which avoids the wind noise. In addition, this windshield is weather resistant, which is perfect for outdoor work.
The BY-WM8 Pro-K2 UHF Dual-Channel Wireless Lavalier System from BOYA includes a UHF dual-channel wireless receiver, two wireless bodypack transmitters, two omnidirectional lavalier microphones, two microphone clips and foam windscreens, a shoemount adapter, single 1/8" to XLR output cable, single 1/8" to 1/8" output cable, and carrying case. This wireless
The Boya 3.5mm TRS to USB 35C - USB C can be used when you want to record audio on your USB-C smartphone. You can use the connector in combination with a microphone, transmitter and receiver. Or in combination with the Boya 3.5mm TRS to XLR Adapter XLR, connect the connector to the adapter to which you connect a microphone with XLR connection. The connector
Bundled together for the convenience of iOS users, the Rode SC6-L Mobile Interview Kit includes the SC6-L Mobile Interface, two smartLav+ lapel microphones, and accessories such as storage pouches, mic clips, and windshields. The SC6-L interface facilitates the recording of 24-bit / 48 kHz broadcast-quality audio, giving you two TRRS inputs for the
The RODE SC6-L is an interface designed to record two-person interviews directly to your iOS device. The interface accepts the inputs of the RODE smartLav+ microphone, multiple types of RODE VideoMics (in conjunction with TRRS adapters), and third-party microphones with the appropriate TRRS connection points.At one end of the SC6-L, you'll find two 3.5mm
Use the Rode Lavalier GO omnidirectional lavalier microphone to get the convenience and clarity of a broadcast-quality, clip-on lapel mic for your Rode Wireless GO system. Ideal for mobile journalists and videographers, the Lavalier GO features a durable Kevlar-reinforced cable terminated in a gold-plated 3.5mm TRS connector for enhanced conductivity.
The DeadCat Go is a windproof fur that allows you to use the VideoMic Go in windy places. Synthetic fur is specifically designed to minimize wind noise while remaining acoustically transparent.
The DeadCat Go is a windproof fur that allows you to use the VideoMic Go in windy places. Synthetic fur is specifically designed to minimize wind noise while remaining acoustically transparent.
Get the Sennheiser MKE 400 camera-mount shotgun microphone to experience sound quality better than your camera's built-in microphone allows. With extremely long battery life, adjustable sensitivity, and a selectable bass roll-off, the MKE 400 is fitting for mobile journalists, vloggers, and run-and-gun shooters.
Designed for videographers on a limited budget and video hobbyists, BY-WM4 PRO is a new generation 2.4 GHz wireless microphone, with dual-Channel for receiver, easy-to-use and compact design, it's ideal for interviews, run-and-gun video shoots, vlog production and more.
The BYY M1 omnidirectional clip-on microphone from BOYA is compatible with smartphones, DSLRs, camcorders, audio recorders, Mac and Windows computers, and more. The omnidirectional microphone model is equipped with full 360 ° coverage and the 6.1m cable terminated by a 3.5mm TRRS gold-plated mini-jack plug.
The Boya Lavalier Microphone for BY-WM Series is a small and handy microphone that you can use for various purposes. The microphone is equipped with a tie-clip and is very universal by using the 3.5mm jack plug.This Lavalier Microphone has a length of 1.2m
TRS female 3.5 mm to TRRS male 3.5 mm adapter. Allows 3.5mm self-powered TRS microphones to be connected to a mobile device with a TRRS audio input.
The BOYA BY-BCA7 is a microphone cable with integrated preamplifier, allowing you to connect a dynamic XLR microphone or a stand-alone condenser microphone. It is compatible with iOS devices (iPod, iPhone and iPad) with a Lightning connector. It has a 3.5 mm (1/8 ") stereo headphone jack which allows monitoring and level control in 3 positions (0, -10 dB,
Boya BY-M3 Lavalier Microphone for USB-CThe Boya BY-M3 clip-on microphone for USB-C is ideal for use during walking, speaking, conference or hands-free calls. The microphone can be easily attached to the collar of your garment, giving you great freedom of movement. The cable has a length of 6 meters. The microphone can be used with all devices with a USB-C
Boya BY-M3D Dual Clip Lavalier Microphone for USB-CThe Boya BY-M3D clip-on microphone for USB-C is ideal for use while walking, speaking, conference, or hands-free calling. The microphone can be easily attached to the collar of your garment, giving you great freedom of movement. The two cables are 6 meters long. The microphone can be used with all devices